TRO

Your Sport Touring Motorbike Fix

Jul 4, 2020CommentShare

Updated Jan 20, 2023 ...

Jon DelVecchio

Listen in as Tim, Robin and Travis discuss the new V-Strom, bead breaking and Klim riding pants. Music by Otis McDonald. Download our feed here.

Addict | Apple | Amazon | Boomplay | Deezer | Google | L. Notes | iHeart | PlayerFM | PodBean | Podchaser | Spotify | Stitcher | TuneIn

The Gist

Jeff Alford of Total Rider (Texas) suggested we should come up with a better intro, so Tim, Robin and Travis did just that. Travis talks V-Strom XT, Robin breaks a tire bead and Tim wears vinyl pants. If you get creative, all are universally interchangeable.

Jon DelVecchio is our interview this round and we sure are lucky to have him! Jon is the author of Cornering Confidence: The Formula for 100% Control In Curves. His book is an excellent read, providing motorcycle riders with a simple progression of skills to elevate their riding in a short period of time.

The guys also field questions about Northern Tool trailers, rear sprocket alignment and chain contact points. If you're not into listening, well ... that specific trailer is no more, you could use a laser tool and "yes". Clear as mud, right?

Guest Interview

Jon Delvecchio

Jon DelVecchio is our interview this round and we sure are lucky to have him! Jon is the author of Cornering Confidence: The Formula for 100% Control In Curves. His book is an excellent read, providing motorcycle riders with a simple progression of skills to elevate their riding in a short period of time.

Jon's complete, hour-long interview is available here! Listen or Download: MP3 | WAV

Updated Site Features And Developments

  • Partnered with Twisted Road to offer motorcycle rentals!
  • Still working on that neverending "forever" code overhaul.
  • Group tours now have room sharing, testimonials and a waitlist.
  • Podcast page material self generates! Yay!
  • You can now write for TRO from just about any page. Have at it.

Model Focus

V-Strom XT

Travis has his geekery pointed at the 2020 V-Strom XT. It has a reworked Engine, same displacement, throttle by wire, cruise control, traction control and even engine modes. Eventually all of these luxuries get weighed against the Yamaha Tracer 900.

Kit We're "Blatantly Pushing You To Buy"

New Kit

3M Clear Paint Surface Protection Bulk Film Roll 6-by-84-inches

3M paint surface protection film is virtually invisible once installed. Clear polyurethane film is 6mil thick with adhesive backing. Product applied to reduce paint chips and road damage. Keeps your car's paint looking newer, longer. Step by step installation instructions available online

Noteworthy Articles

Listener Questions

William O. Yates really liked the idea of Northern Tool's single rail motorcycle trailer. He asked where he might find one. Unfortunately, they took it off the menu. Said trailer was known to be a bit problematic. The next option, albeit slightly larger, is significantly better.

"Rolando" asks a two-fer ...

Q1: I tried centering my sprockets on the chain. Some teeth ended up to the left when looking underneath. Is this normal?

A1: Underneath the sprocket, the chain becomes loose, so the extra slack will have this effect. It's nothing to worry about, so long as the chain is properly adjusted (see your manual).

Q2: Are your sprocket teeth all centered from the point it makes contact with the chain?

A2: They are for the most part. There's some minor deviation but not much. Basically, make sure your chain is clean and in usable condition first. Is it dirty? Damaged? Are there any kinks? What about the sprocket? Is it marred in any way? Shark toothed? Once I confirm that the chain and sprocket are in proper working order, then and only then do I assume my adjustments will be technically correct. If the post-adjustment setting seems "odd" afterward, it might be worth pulling an engine cover off to look at the FRONT sprocket and be sure it's not shark toothed.

Should you have any motorcycle-pertinent questions you'd like answered, email them via our contact form or by calling (224) 358-3010.

Did We Miss Anything?

Sixty percent of the time, we're right every time. What would you add to the conversation and why? Your input is invited. Leave a comment!

Share Link ...

Leave a Reply

Your email address will not be published. Required fields are marked *